E-paper Display Q&A
Yes,for Customized desgin EPD,we can sign NDA with Customer
Normally,in order to get the best contrast ratio,we suggest you to refresh the EPD at least one time per 6 hours
4-6 weeks for samples and 10-12 weeks for mass production
Yes,Because of the PS film on both sides of EPD,the display is water proof and Anti-UV, but we suggest you to protect the products from the condition of high humidity and UV light for long time to increase the lifetime
Yes, as shown in this video: https://youtu.be/STcmru966V8)
Different products have different resolution. For furthur study, please refer to specific datasheet
EPD production Monthly capacity for size of 2.9(KK)
Min. 8:1
The min thickness of EPD with FPC base can be 0.42mm
For graphic type,the operating temperature is 0~+50℃ For segment type,the operating temperature is -10C-+60℃
The min thickness of EPD with FPC base can be 0.42mm
The max size of the Customized design E-Paper in segment type is 596×396 in mm
It is about 5 years.
Yes, DKE does provide flexible EPD. Normally, those are FPC based ones
customization is up to 14”x16”, EPD is up to 396x596mm
It is about a million times of refreshing
Quantity below 1K is reconsidered as samples. MOQ is 1K. (Our range is 1K to 10K, 10K to 100K, above 100K.)
For this kind of temperature ranges, we do not recommend E-paper display, as clients use EPD for its low power consumption
It is not like that, E-ink supports a set of film that can work in -25℃ to 10℃ and 0℃ to 50℃
For customized products, we allow one or two small batches to start with. Then, the MOQ will be depended on the customized products
All the costs regarding customization will be mostly depended on clients’ actually requirements,